Overview
Rogue KG Competition Plates are elite-level bumper plates officially certified by the International Weightlifting Federation (IWF). These plates are engineered for maximum precision, featuring chrome-plated steel disc inserts and a tight 50.4MM collar opening for a firm, rattle-free hold. They are updated with a gloss-matte-gloss color finish and raised lettering, reflecting the highest standards of quality in the sport. With a Shore A Durometer rating of 94, these plates deliver a consistent "dead blow" with minimal bounce, making them the premier choice for Olympic competition and professional training facilities.
Product Page: Rogue KG Competition Plates (IWF)
Key Features & Specifications
IWF Approved: Certified for international competitive use.
Plate Diameter: 450MM (17.72”) – IWF Standard.
Collar Opening: 50.4MM (1.98”) precision opening.
Weight Tolerance: Within +/- 15 grams of claimed weight.
Durometer Rating: 94 (Produces an extremely low, dead bounce).
Insert Type: Steel Disc, Chrome Plated.
Finish: Gloss-Matte-Gloss with raised lettering and IWF branding.
Plate Widths:
10KG (Green): 29MM (1.15”)
15KG (Yellow): 42MM (1.65”)
20KG (Blue): 55MM (2.15”)
25KG (Red): 66MM (2.50”)
Origin: Imported.
Performance Benefits
Metric Precision: Calibrated to an elite +/- 15-gram tolerance, providing athletes with the exact loading required for sanctioned competitive events and record-setting attempts.
Dead Bounce Stability: The high durometer rating (94) ensures the bar stays exactly where it lands, increasing lifter safety and reducing noise/vibration in the facility.
Raised Protective Flanges: A raised rubber surface prevents direct metal-on-metal contact between the chrome center discs when plates are stacked on a bar or rack, preserving the finish and lettering.
Narrow Competition Profile: These plates are significantly thinner than standard training bumpers, allowing for maximal loading (over 200KG) on a standard 20KG barbell.
Easy Pick-up: A convenient lipped edge around the perimeter makes the plates easier to lift from a flat floor or pull from a storage rack compared to flat-sided bumpers.
Maintenance and Care
Initial Surface Film: Competition plates may have a slight oily film from the mold. Wipe down with a clean, dry microfiber cloth before the first lift.
Regular Upkeep: Use a damp cloth and mild soap to clean the rubber. For the chrome disc center, use a dry cloth to maintain the shine and remove fingerprints or oil.
Indoor Use Recommended: These are high-precision competition plates. To prevent oxidation of the steel center and rubber degradation, store in a climate-controlled indoor environment.
Storage: Store on a dedicated plate tree or horizontally.
Warranty Information
Rogue KG Competition Plates are backed by a Construction Warranty against structural failure and manufacturing defects.
Coverage: Applies to the original purchaser.
Exclusions: Does not cover normal cosmetic scuffing or damage caused by dropping onto non-impact-absorbing surfaces like concrete or asphalt.
Frequently Asked Questions (FAQ)
Q: Do I need a special barbell for these plates? A: No, the 50.4mm opening is designed to fit any standard Olympic-spec 50mm barbell sleeve. However, they are best paired with high-quality weightlifting bars like the Rogue Pyrros Bar.
Q: Do these plates smell like rubber? A: These are made with premium virgin rubber and have a very low odor compared to recycled crumb rubber plates. Any initial scent typically dissipates within 48 hours.
Q: Are these plates sold as singles or pairs? A: Rogue KG Competition Plates are sold in pairs or as part of combination sets.
Q: How do these compare to Training KG Bumpers? A: Training KG Bumpers share the same diameter and weight tolerance but typically feature a lower durometer (86) and zinc-plated inserts. Competition plates are harder (lower bounce) and use chrome-plated steel discs.