Overview
The Rogue S-2 Squat Stand 2.0 is a highly versatile, American-made squat rack that is often described as being "more power rack than squat stand." Part of the Infinity Series, it is built from 2x3" 11-gauge steel and features a redesigned "flat-foot" base with triangle plates for maximum stability. At 92" tall, it provides the vertical clearance needed for pull-ups while maintaining a compact footprint, making it a favorite for garage gyms and professional training centers alike.
Product Page: Rogue S-2 Squat Stand 2.0
Key Features and Specifications
Series: Infinity Series (2x3" 11-gauge US steel).
Hardware: 5/8” diameter bolts and fasteners.
Hole Spacing: Westside pattern (1” spacing through the bench and clean pull zone, 2” spacing elsewhere).
Dimensions:
Height: 92".
Footprint: 48" x 48".
Weight: 146 LB (Total unit weight).
Weight Capacity: 1,000+ LB.
Standard Inclusions: (2) Infinity J-Cups with protective UHMW plastic inserts and your choice of a Fat/Skinny Pull-Up Bar (2" and 1.25") or a Single Skinny Pull-Up Bar (1.25").
Base Design: Redesigned bolted triangle-plate base for superior rigidity compared to the original formed socket design.
Finish: Signature Black powder coat.
Manufacturing: Proudly Made in the USA (Columbus, Ohio).
Performance Benefits
Total Training Hub: Beyond squats and presses, the S-2 functions as a full pull-up station and can be customized to perform floor presses, benching, and clean pulls.
Compact Reliability: Occupies just a 4' x 4' area, allowing you to build a comprehensive home gym in half of a single-car garage.
Westside Precision: 1" hole spacing through the "bench zone" allows for perfect safety and J-cup height placement, crucial for consistent setup and solo lifting.
Modular Versatility: Fully compatible with a vast range of Infinity Series accessories, including Safety Spotter Arms, the Matador dip station, and landmines.
Self-Stabilizing: The heavy steel and wide base mean the unit does not have to be bolted to the floor for standard squats and strict pull-ups.
Maintenance and Care
Initial Setup Audit: Ensure all 5/8" hardware is tightened to spec using 15/16" wrenches or sockets. Check all bolts after the first week of use to ensure they have settled correctly.
Hardware Tension Check: Every 6 months, verify the tightness of the base and pull-up bar bolts. Vibrations from racking weight or high-rep pull-ups can occasionally cause minor loosening.
UHMW Liner Check: Periodically inspect the plastic liners on the J-cups. Replace them if they show signs of thinning to protect your barbell's knurling and the rack's finish.
Surface Cleaning: Wipe down the matte black frame with a damp cloth and mild soap.
Outdoor Use: If used outdoors (as some owners do), keep the unit covered with a tarp when not in use and apply a light coat of WD-40 or silicone spray inside the uprights to inhibit rust.
Warranty Information
Frame and Welds: Guaranteed by Rogue for Life.
Standard Parts: 5-year warranty on mechanical and moving components.
Frequently Asked Questions
Q: Do I need to bolt this to the floor?
A: No. The S-2 is designed for standalone use. However, for maximum security during aggressive kipping pull-ups or when using heavy safety spotter arms, the optional Floor Mounting Feet are recommended.
Q: Does it fit under an 8-foot ceiling?
A: Yes. A standard 8-foot ceiling is 96". The S-2 stands at 92", leaving 4 inches of clearance.
Q: Is the pull-up bar height adjustable?
A: Yes, the pull-up bar can be mounted at multiple heights along the uprights to accommodate your height or ceiling restrictions.
Q: Can I use Monster Lite accessories on this?
A: No. While both use 5/8" hardware, Monster Lite accessories are designed for 3x3" steel. This rack uses 2x3" steel, so only Infinity Series accessories are compatible.