Overview
Rogue Infinity Safety Spotter Arms are heavy-duty safety attachments designed specifically for the Rogue Infinity Series and S-Series squat stands. Built to provide critical protection during solo lifting sessions, these arms act as a dependable fail-safe for squats, bench presses, and other rack-based movements. By catching the barbell in the event of a failed rep, they protect both the lifter from injury and the equipment from damage.
Product Page: Rogue Infinity Safety Spotter Arms
Key Features and Specifications
Pin Size: 5/8” (Compatible with Infinity Series and S-Series Squat Stands).
Construction: 2x3” 11-gauge steel tubing.
Dimensions: 20” depth from the upright (Total length approximately 24").
Weight: 32 lbs per pair.
Compatibility: Works with all Infinity Rigs, Wall Mounts, and S-1, S-2, and S-3 Squat Stands. (Not compatible with old SPX stands).
Protection: Topped with UHMW plastic liners to prevent metal-on-metal contact with the barbell.
Origin: Made in the USA.
Performance Benefits
Lifter Safety: Provides the necessary security to push for personal records (PRs) without a human spotter, ensuring the bar is caught safely if a lift cannot be completed.
Barbell Preservation: The integrated UHMW plastic liners are designed to absorb the impact and protect the knurling of your barbell, preventing scratches or dulling during contact.
Ease of Use: The simple pin-and-swing design allows for rapid height adjustments, making it easy to transition from squat height to bench press height in seconds.
Heavy-Duty Reliability: Constructed from the same 11-gauge steel as Rogue's industrial-strength racks, ensuring the arms can handle significant weight drops without structural failure.
Maintenance and Care
UHMW Inspection: Periodically check the plastic liners for significant wear, cracks, or deep gouges. While durable, these liners are designed to take the impact instead of your bar and can be replaced if they become excessively worn.
Hardware Check: Ensure the mounting pins and structural welds are free of debris or rust.
Cleaning: Wipe down the steel and plastic surfaces with a damp cloth and mild detergent to remove chalk buildup and sweat, preserving the finish and grip.
Warranty Information
Rogue Fitness provides a Limited Lifetime Warranty on the structural welding and steel components of the Infinity Safety Spotter Arms. The UHMW plastic liners are considered wear items and are not covered under the lifetime warranty, though replacement kits are available through Rogue's customer service.
Frequently Asked Questions
Q: Will these fit my Monster Lite rack? A: No. While the pins are the same size (5/8"), Monster Lite racks use 3x3" uprights, whereas these are designed for the 2x3" uprights found on the Infinity series.
Q: Can I use these on the Rogue Echo series? A: No. These are specifically manufactured for the Infinity and S-Series hole spacing and tube dimensions.
Q: Do I need to use safety pins with these? A: These arms utilize a standard pin-and-clasp design. Always ensure the arm is fully seated and the pin is completely through the upright before beginning a lift.
Q: How much weight can they support? A: These are built to the same heavy-duty specifications as Rogue’s Infinity racks, designed to handle heavy residential and commercial lifting loads.