Overview
The Rogue Wall Mount Matador Hanger is a streamlined, durable storage solution designed to keep your gym organized and your floor space clear. Specifically engineered to hold any Rogue Matador dip station (including Infinity, Monster Lite, and Monster Series models), this hanger is made from laser-cut 11-gauge steel and can be mounted to most standard stud walls.
Product Page: Wall Mount Matador Hanger
Key Features and Specifications
Compatibility: Stores all Rogue Matador models (Infinity, Monster Lite, and Monster Series).
Construction: Laser-cut and formed 11-gauge American steel.
Dimensions: 18" Length x 4.25" Depth x 4.5" Height.
Mounting Holes: Spaced 16" on-center (Standard stud spacing).
Weight: 3.28 lbs.
Hardware Required: 3/8" mounting hardware (Not included).
Finish: Texture Black powder coat with a laser-cut Rogue logo.
Origin: Made in the USA.
Performance Benefits
Space Optimization: By mounting your Matador to the wall, you eliminate a common tripping hazard and free up valuable floor space in small garage gyms or high-traffic facilities.
Equipment Protection: A specialized tab at the bottom of the bracket keeps the Matador hanging perfectly vertical, ensuring it does not swing and damage your gym wall or the unit's finish.
Easy Access: Keeps your dip station at a convenient height, making it quick and easy to grab for workouts and stow away immediately afterward.
Professional Organization: Provides a dedicated, high-quality storage point that matches the aesthetic of other Rogue rack and storage systems.
Maintenance and Care
Mounting Security: Periodically verify that the mounting lag bolts remain tight and secure within the wall studs, especially if the Matador is frequently stowed and removed.
Cleaning: Wipe the hanger down with a damp cloth to remove dust and chalk. The Texture Black powder coat is resilient but benefits from regular cleaning to prevent buildup.
Finish Protection: Inspect for any scratches in the finish. While the bracket is structural, any deep chips should be touched up with a rust-inhibitor paint if installed in a humid environment.
Proper Loading: Ensure the hanger is only used for its intended purpose. It is designed specifically for the weight and dimensions of Rogue Matadors.
Warranty Information
Rogue Fitness offers a Limited Lifetime Warranty on the structural integrity and welding of the Wall Mount Matador Hanger. The powder-coated finish and any third-party mounting hardware used are subject to standard wear and tear and are not covered under the structural lifetime guarantee.
Frequently Asked Questions
Q: Does this include the bolts for the wall? A: No. 3/8" mounting hardware (such as lag screws for wood studs or anchors for concrete) must be purchased separately based on your specific wall type.
Q: Can I use this for other rack attachments? A: No. This hanger is designed specifically for the dimensions and center-of-gravity of the Rogue Matador series. Using it for other items may result in damage to the hanger or your wall.
Q: Will it fit on 24" stud spacing? A: The pre-drilled holes are 16" on-center. For 24" spacing, you would need to mount a wood stringer (such as a 2x4 or 2x6) to the wall first, then mount the hanger to the stringer.
Q: Is there any assembly required? A: No. The hanger is a single piece of formed steel ready to be mounted out of the box.