Overview
The Rogue Monster Matador Hanger is a set of heavy-duty, bolt-on steel plates designed specifically for the secure storage of the Rogue Monster Matador dip station. This attachment allows for a clean, space-efficient storage solution on any Rogue Monster Series rack or rig, as well as the side panels of a Monster Mass Storage System. By moving the Matador off the floor and onto the rack, gym owners can maintain a safer and more organized training environment.
Product Page: Monster Matador Hanger
Key Features and Specifications
Compatibility: Exclusively for Rogue Monster Series racks, rigs, and Mass Storage Systems (1" hole spacing).
Construction: 3/16” thick laser-cut American steel side plates.
Storage Channel: 3” wide channel specifically designed to accept the 3” tubing of the Monster Matador.
Protection: Features 3/8” thick UHMW plastic on each plate to protect the finish of the Matador during storage.
Weight: 4.5 lbs (without hardware).
Dimensions: 8.625" (L) x 6.1875" (H).
Finish: MG Black powder coat.
Hole Spacing: Mounting holes are 4" on-center.
Manufacturing: Made in the USA.
Performance Benefits
Optimized Organization: Originally developed for collegiate facilities, this hanger provides a professional way to stow large dip attachments, reducing floor clutter in garage gyms and commercial centers.
Finish Preservation: The integrated 3/8" UHMW plastic ensures that sliding the Matador into the hanger doesn't result in metal-on-metal contact, preserving the powder coat of both the rack and the accessory.
Versatile Mounting: Can be bolted to any upright or storage crossmember within the Monster ecosystem, allowing you to choose the most convenient height for access.
Multi-Use Potential: While designed for the Matador, many users find the wide hooks useful for storing other compatible rack accessories or even specialized handles like the TF-1.
Maintenance and Care
Hardware Tightness: Periodically verify that the 1" mounting hardware remains fully tightened. Vibrations from high-impact use of the rack can occasionally cause bolt-on accessories to loosen.
UHMW Inspection: Inspect the plastic liners for any signs of cracking or excessive wear. If the plastic is compromised, replace it to continue protecting the Matador’s finish.
Cleaning: Wipe down the steel plates and plastic with a damp cloth to remove dust, chalk, and sweat.
Finish Protection: The MG Black powder coat is highly durable, but any deep chips in the steel should be touched up with rust-inhibitor paint if the unit is in a high-humidity environment.
Warranty Information
Rogue Fitness offers a Limited Lifetime Warranty on the structural welding and steel components of the Monster Matador Hanger. The UHMW plastic liners and mounting hardware are considered wear items and are covered against manufacturing defects but excluded from the structural lifetime guarantee.
Frequently Asked Questions
Q: Will this fit my Monster Lite rack? A: No. Monster Lite racks use 5/8" hardware and different hole spacing. You will need the "Monster Lite Matador Hanger" for those systems.
Q: Is this sold as a single unit or a pair? A: It is available for purchase either as a single hanger or as a cost-effective 2-pack.
Q: Can I mount this to a wall? A: This specific model is a bolt-on rack attachment. For wall storage, the "Wall Mount Matador Hanger" is the recommended product as it includes 16" on-center mounting holes for wall studs.
Q: Does it interfere with plate storage? A: Because it mounts flush to the upright, it typically does not interfere with plate storage, provided it is positioned in an open section of the upright.