Overview
The Rogue Sockets & Hardware kits provide the essential mounting components needed to install a Rogue Socket Pull-Up Bar to an existing Rogue rack or rig. Available "a la carte," these kits allow for maximum customization and interchangeability, enabling athletes to swap out pull-up bars of different finishes, colors, or knurling styles without replacing the entire mounting system.
Product Page: https://www.roguefitness.com/rogue-sockets-hardware
Key Features and Specifications
Compatibility: Available in three specific configurations to match Rogue Infinity, Monster Lite, or Monster Series units.
Socket Construction: Heavy-duty steel mounting sockets with precision-drilled holes.
Hardware Finish:
Monster: Bright Zinc bolt assemblies and MG Black sockets.
Monster Lite: Black Zinc bolt assemblies and Textured Black sockets.
Infinity: Bright Zinc bolt assemblies and Textured Black sockets.
Mounting Specs: Socket mounting holes are positioned 6” on center.
Dimensions: Designed to accommodate the standard 1.125" diameter Rogue Socket Pull-Up Bar.
Interchangeability: Patent-pending design allows for easy swapping of pull-up bars between users or training sessions.
Origin: Made in the USA.
Performance Benefits
Modular Customization: By purchasing hardware separately, gym owners can maintain multiple bars (e.g., one knurled for heavy sets and one smooth Cerakote for high-volume gymnastics) and swap them into the same rack space.
Structural Stability: The dual-socket system ensures the pull-up bar remains completely stable and "locked-in" during dynamic movements like kipping or muscle-ups.
Anti-Spin Technology: When used with the required button-head screws (sold separately), the sockets prevent the pull-up bar from rotating during use, providing a safer and more consistent grip.
Maintenance and Care
Hardware Check: Periodically inspect the bolt assemblies and button-head screws to ensure they remain tight. Dynamic vibration from workouts can loosen hardware over time.
Tool Requirement: A 7/32” Allen wrench is required to tighten the bar-stabilizing screws; standard wrenches or sockets are required for the main rack bolts (size varies by series).
Finish Protection: Avoid using harsh chemical cleaners on the powder-coated or zinc-plated surfaces to prevent corrosion or chipping. Wipe down with a damp cloth if exposed to excessive chalk or sweat.
Frequently Asked Questions
Q: Does this kit include the pull-up bar?
A: No. This kit includes only the mounting sockets and the bolts to attach them to the rack. The 43” Socket Pull-Up Bar and the small button-head screws used to stabilize the bar are sold separately.
Q: Can I use the Monster sockets on a Monster Lite rack?
A: No. Each kit is specifically sized for the hardware and tubing dimensions of its respective series (e.g., 1” hardware for Monster, 5/8” hardware for Monster Lite).
Q: Do I need to take the whole rack apart to change the bar?
A: You will need to disassemble the pull-up bar section from the rack uprights to swap the bar within the sockets, but the rest of the rack structure can remain intact.
Q: What tools do I need for installation?
A: You will need a 7/32” Allen wrench for the bar-set screws and a socket/wrench set compatible with your rack's hardware (1-1/2" for Monster or 15/16" for Monster Lite/Infinity).