Overview
The 2x3 Strip® 2.0 is a specialized, wall-mounted storage and performance tool designed to securely hold a variety of attachments, primarily from the Rogue Infinity line. This newly redesigned version transitions from a channel to a fully enclosed 2x3” square 11-gauge steel tube, providing enhanced structural strength and a more secure fit for your equipment. By moving bulky accessories to the wall, gym owners can optimize their floor space and create a more organized training environment. You can find the product here: The 2x3 Strip® 2.0.
Key Features and Specifications
Brand: Rogue Fitness
Materials: 2x3” 11-gauge square steel tubing with an MG Black powdercoat finish.
Length Options: Available in Standard (36”) and Half-Strip (16”) formats.
Product Weight: 10.15 LB (Standard) / 4.5 LB (Half).
Hardware Included: Comes with (1) 5/8" x 4" detent pin and a set of wood lags (4 for Standard, 2 for Half-Strip).
Hole Spacing: Holes are spaced 2” on-center along each side of the Strip.
Mounting: Features front-facing oversized holes to allow for easy tightening of the lag screws during installation.
Compatibility: Designed specifically for Rogue Infinity Series attachments (2x3” tubing).
Manufacturing: Made in the USA.
Performance Benefits
The 2x3 Strip® 2.0 serves as a versatile hub for various rack attachments, effectively turning any wall space into a functional extension of your gym. It is compatible with a range of Infinity series products, including the Infinity Matador (dip station), Vertical Plate Storage, Dry Erase Channels, and the Infinity Kids Pull-Up Bar. Because the Strip can be mounted either horizontally or vertically, it offers complete flexibility in layout. Multiple Strips can be installed in a sequence to allow for height adjustments of attachments or to create a professional-looking storage wall for all your smaller rack accessories.
Maintenance and Care
To keep the powdercoat finish looking new, periodically wipe down the Strip with a damp cloth to remove chalk, sweat, and dust. Regularly check the mounting lags to ensure the Strip remains flush and securely anchored to the wall, particularly if it is frequently used to support heavy or dynamic loads. Ensure the 5/8” detent pin remains clear of debris for smooth insertion and removal of accessories. Important: The Strip is recommended for mounting to wood studs or concrete walls only; it is NOT recommended for mounting directly to drywall or metal studs without additional structural support or a stringer.
Frequently Asked Questions
Q: Can I use Monster Lite or Monster attachments on this Strip? A: No. The 2x3 Strip® 2.0 is designed specifically for Infinity Series attachments (2x3” tubing). For Monster Lite (3x3”, 5/8” hardware), use the 3x3 Strip 2.0. For Monster (3x3”, 1” hardware), use the Monster Strip®.
Q: Can I mount this to a concrete wall? A: Yes, it can be mounted to concrete, but the buyer is responsible for sourcing the correct concrete-specific hardware, as the included lags are designed for wood studs.
Q: Does it come with a detent pin? A: Yes, each order of the Standard or Half-Strip includes one 5/8" x 4" detent pin to secure your attachments.
Q: Is assembly required? A: No assembly is required for the Strip itself; however, you will need to mount it to your wall using the provided hardware and a drill/impact driver.