Product Guide: Rogue Squat Stand Wheel Bracket Set – Rogue Fitness

Overview

The Rogue Squat Stand Wheel Bracket Set is a specialized mobility accessory designed for owners of Rogue Infinity (S-Series) and Monster Lite (SML) squat stands. This set allows for the safe and easy relocation of heavy stands within a garage gym or training facility, maximizing floor space when the unit is not in use. Hand-built in the USA from heavy-duty laser-cut steel, these brackets remain slightly elevated during training to ensure stability and only engage when the stand is tilted for transport.

Product Page: https://www.roguefitness.com/squat-stand-wheel-bracket

Key Features and Specifications

Compatibility: Specifically for Rogue S-Series (Infinity) and SML (Monster Lite) Squat Stands. Not compatible with the S-4 model.
Bracket Construction: Manufactured from 3/8" thick laser-cut steel.
Wheel Specs: 3” diameter heavy-duty wheels.
Manufacturing: Proudly Made in the USA.
Weight: 4 lbs per set.
Finish: Signature Rogue Black Powder Coat.
Optional Add-on: Can be purchased with a pair of Band Pegs to serve as handles during transport.

Performance Benefits

Space Efficiency: Enables gym owners to easily roll their squat stands out of the way for metabolic conditioning, floor work, or parking a vehicle in a shared garage space.
Tipping Stability: The brackets are engineered to mount such that the wheels remain off the ground when the rack is level, ensuring the unit doesn't move during squats or presses.
Ease of Use: When paired with the optional band pegs (used as handles), the rack can be tilted onto the wheels with minimal effort, allowing for smooth movement over rubber flooring or concrete.

Maintenance and Care

Wheel Cleaning: Periodically wipe the 3" wheels to remove hair, lint, and gym chalk that could impede smooth rolling.
Hardware Check: Every few months, verify that the 5/8" bolts securing the brackets to the base tubes are tight. Using a 15/16” socket or wrench is recommended for these adjustments.
Powder Coat Protection: To prevent oxidation, wipe the steel brackets with a damp cloth to remove sweat and moisture. Touch up any deep scratches with a rust-preventative paint.
Bearing Maintenance: If the wheels begin to squeak or feel stiff, apply a small amount of silicone-based lubricant to the wheel axle.

Warranty Information

Limited Lifetime Warranty: Rogue Fitness warrants the structural steel and welds of the wheel brackets against defects in material and workmanship for the lifetime of the original purchaser.
Wheel Wear: The 3" wheels are considered wear items and are typically covered under a 1-year limited warranty against manufacturing defects.

Frequently Asked Questions

Q: Is mounting hardware included?
- A: No. The set is designed to utilize the existing 5/8” hardware already on your Rogue Squat Stand.
Q: Can I use the band pegs for training while the wheels are attached?
- A: No. The optional band pegs are intended ONLY for use as transport handles. Using bands on a squat stand that is not bolted to the floor is a serious safety hazard and can cause the stand to tip.
Q: Will these fit my Monster (1" hardware) rack?
- A: No. These brackets are designed for 5/8" hardware. Monster Series racks typically require a different mobility solution.
Q: Do I need a second person to move the rack?
- A: While possible for a single person, Rogue recommends having a second person assist when moving larger stands (like the S-2 or SML-2) to ensure safety and balance.