Overview
The Rogue Monster Bolt-Together Wall Ball Target is a heavy-duty, rack-mounted solution designed to eliminate wall scuffing and encourage high-standard accuracy during wall ball shots. Built specifically for the Rogue Monster Series, this target allows athletes to bring competition-level standards to their own training environment. It features a crosshair design for improved aim and multiple height adjustment options to suit various training needs.
Product Page: Monster Bolt Together Wall Ball Target - Rogue Fitness
Key Features and Specifications
Construction: 3/16” (0.1875") thick laser-cut steel plate.
Target Diameter: 16” for a clear, high-visibility target area.
Compatibility: Exclusively compatible with Rogue Monster Series racks and rigs (uses 1" hardware).
Adjustable Heights: Features mounting options for 9', 9.5', and 10' target heights.
Mounting Hardware: Includes all necessary 1” hardware for installation.
Finish: MG Black powder-coated arm with a decal crosshair for precision.
Extension: When mounted at the highest setting, the center of the target sits 12" above the top of the upright.
Performance Benefits
Wall Protection: Eliminates the need to throw medicine balls against drywall or siding, preventing surface damage and unsightly scuff marks.
Precision Training: The etched crosshair design forces the athlete to focus on a specific point, translating to better performance in competition settings.
Standardized Height: Allows for accurate setup of the 10' standard height (requires a 9' or taller upright to reach competition height).
Sturdy Build: Unlike plastic or wood alternatives, the 3/16" steel ensures the target remains rigid and quiet even during heavy impact.
Maintenance and Care
Fastener Check: Periodically inspect the 1" mounting bolts to ensure they remain tight, especially in high-traffic commercial environments where vibration from the rack may loosen them over time.
Decal Care: The target face features a sticker for the crosshairs. To prevent peeling, avoid using harsh abrasive cleaners on the target face. Wipe with a damp cloth if medicine ball residue (chalk or dirt) builds up.
Corrosion Prevention: If used in a garage or humid environment, check the edges for any chips in the powder coat and touch up with black paint to prevent rust.
Frequently Asked Questions
Q: Can I use this on a Monster Lite rack? A: No. This specific model is designed with 1" hardware for the Monster Series. For Monster Lite or Infinity racks (which use 5/8" hardware), you must purchase the standard "Rogue Bolt-Together Wall Ball Target."
Q: Do I need a 10' upright to hit a 10' target height? A: No. Because the target arm extends 12" above the upright at its highest setting, you can achieve a 10' center-target height using a standard 9' (108") Monster upright.
Q: Is the target loud when the ball hits it? A: Due to the 3/16" steel thickness and the bolt-together design, the target is relatively quiet compared to thinner metal targets, though there will always be some audible impact sound.
Q: Can I replace the crosshair sticker if it wears off? A: The sticker is considered a wear-and-tear item. While Rogue does not currently sell standalone replacement stickers, the steel plate itself is permanent and can be painted with a stencil if the decal eventually fades.