Overview
Rogue Fleck Plates provide a unique aesthetic and functional alternative to traditional solid-color bumper plates. Engineered with a high Shore A Durometer rating of 90, these plates offer a consistent dead bounce, making them ideal for high-volume training in garage gyms, CrossFit affiliates, and weightlifting clubs. Each weight increment features a specific "fleck" color pattern against a matte black rubber base, allowing for easy plate identification from a distance without the maintenance of full-color plates.
Product Page: Rogue Fleck Plates
Key Features & Specifications
Construction: Virgin rubber with a 304 Stainless Steel hub insert.
Diameter: 450MM / 17.72" (IWF Standard).
Collar Opening: 50.40MM / 1.98" (Ensures a tight fit on Olympic barbell sleeves).
Weight Tolerance: +/- 1% of claimed weight.
Durometer Rating: 90 (High hardness for minimal bounce and high durability).
Weight Increments: 10LB to 55LB.
Visuals: Matte black finish with color-coded flecks (Green, Yellow, Blue, Red, White/Grey).
Origin: Imported.
Plate Breakdown: Weight, Color & Width
| Weight | Fleck Color | Plate Width |
|---|---|---|
| 10 LB | Black & Grey | 0.85” |
| 15 LB | Black & White | 1.20” |
| 25 LB | Black & Green | 1.60” |
| 35 LB | Black & Yellow | 2.08” |
| 45 LB | Black & Blue | 2.76” |
| 55 LB | Black & Red | 3.02” |
Performance Benefits
Low Bounce: The 90 durometer rating is significantly harder than standard economy bumpers (typically 75–80), meaning the bar stays close to where it is dropped, improving safety and reducing noise.
Organization: The fleck patterns follow standard IWF color-coding, making it easy for coaches and athletes to manage inventory and verify bar weight at a glance.
Loading Capacity: Because they are thinner than many "crumb" or budget recycled rubber plates, athletes can fit more weight on the bar for heavy deadlifts and squats.
Durability: The 304 stainless steel insert resists rust and is recessed to prevent hub-to-hub collision when loading multiple plates.
Maintenance and Care
Cleaning: Wipe down with a damp cloth and mild detergent to remove chalk, sweat, and dust.
Chemicals: Avoid using petroleum-based cleaners or harsh solvents, as they can degrade the rubber surface.
Storage: Store on a dedicated plate tree or in a toaster rack. Avoid storing in direct sunlight for long periods to prevent rubber hardening or fleck discoloration.
Floor Protection: While bumpers are designed to be dropped, using rubber gym flooring (3/4" recommended) will maximize the lifespan of both your plates and your barbell.
Warranty Information
Rogue Fleck Plates are backed by a 2-Year Warranty from the date of purchase.
10LB & 15LB Warranty Note: These plates are not intended to be dropped individually on a barbell. They should always be used in conjunction with larger plates to prevent warping or insert failure. Dropping them alone may void the warranty.
Frequently Asked Questions (FAQ)
Q: Do these plates have a strong rubber smell?
A: Most users report a very minimal odor upon unboxing, which typically dissipates within 24–48 hours. They do not have the strong "new tire" smell common with recycled crumb rubber.
Q: Are these plates made in the USA?
A: No. While Rogue manufactures a significant portion of its gear in Ohio, Fleck Plates are imported to maintain a budget-friendly price point while meeting Rogue's quality standards.
Q: Can I use Fleck Plates outdoors?
A: While they can be used outdoors, they are optimized for indoor use on rubber matting. For dedicated outdoor training on concrete or asphalt, the Rogue US-MIL Spec Bumper V2 is recommended.
Q: Will these fit my standard barbell?
A: Yes. The 50.4mm opening is compatible with all standard 2" (50mm) Olympic barbell sleeves.