Overview
The RM-43-6RD Flat Foot Rack is a specialized signature edition of the Monster Series, designed in collaboration with world-class strength and conditioning director Ryan "RD" Davis. This 6-post rack is engineered specifically for the heaviest squatting and benching sessions, featuring a "Flat Foot" base that eliminates the need for floor bolting while maintaining elite-level stability. Built from 4x3” 11-gauge steel, it provides a massive footprint and a distinctive aesthetic for those who demand the highest performance from their strength equipment.
Product Page: RM-43-6RD Flat Foot Rack
Key Features and Specifications
Construction: 4x3” 11-gauge steel uprights and crossmembers.
Hardware: 1” Monster Hardware with a Black Zinc finish.
Base Design: Flat Foot base with laser-cut gussets; wider than standard racks at 56" vs 52.5".
Internal Dimensions: Expanded training area with a 50" inside depth (standard is 43").
Upright Height: Standardized at 100.375”.
Finish: Matte Black Powdercoat.
Standard Included Accessories: *
RM43 Matador with Hanger.
RM43 50 Cal Trolley & Lever Arm Kit.
RM43 Safety Spotter Arms.
Crown Pull Up Bar.
Flying Pull Up Bar.
Optimized Plate, Bar, and Band Storage.
RM43 2.0 J-Cups.
Performance Benefits
Non-Invasive Stability: The Flat Foot design utilizes a distributed base and heavy-duty gussets, providing a rock-solid lifting environment without the need to drill into your garage or gym floor.
Maximized Training Volume: The expanded 50" inside depth provides significantly more room for walk-outs on squats and unrestricted movement during benching compared to standard racks.
Comprehensive Training Station: As a signature edition, it arrives with a "full arsenal" of attachments like the Trolley & Lever Arm Kit and Matador, allowing for explosive movements and accessory work immediately after assembly.
High-Capacity Storage: The 6-post configuration is specifically optimized for plate, bar, and band storage, keeping your training space organized and the rack weighted down for maximum inertia.
Maintenance and Care
Fastener Check: Use a 1-1/2" socket or the provided Monster wrenches to verify that all 1" bolts remain tight, especially after heavy lifting sessions or initial assembly settling.
Powder Coat Maintenance: Clean the Matte Black powder coat using a soft microfiber cloth and a mild soap-and-water solution. Avoid harsh chemicals that could strip the finish.
Safety Strap/Arm Inspection: Regularly inspect the Safety Spotter Arms for any signs of hardware fatigue. Ensure the hitch pins are fully engaged before use.
Weight Distribution: For maximum stability, store heavier 45lb and 100lb plates on the lowest storage pegs to lower the rack's center of gravity.