Overview
The Spud Inc. Traveling Farmer Walk Handles are the ultimate space-saving and travel-friendly solution for grip and conditioning training. Designed to eliminate the need for bulky, 5-foot steel bars, these heavy-duty nylon straps allow you to turn any standard Olympic weight plates into functional farmer's walk handles. Whether you are training in a crowded garage gym, a hotel fitness center, or at a local park, these handles provide a professional-grade Strongman experience that fits inside a small gym bag.
Product Page: Spud Inc. Traveling Farmer Walk Handles
Key Features and Specifications
Construction: Multi-layered, high-tensile strength woven nylon webbing.
Handle Design: 8” long, heavy-duty comfortable rubber-coated handles that provide a secure, non-slip grip.
Loading System: 8-foot long straps that loop through the center holes of Olympic weight plates (Iron or Bumper).
Weight Capacity: Loadable to over 300 LB per handle (600 LB+ per pair).
Portability: Extremely lightweight and foldable; the entire set weighs approximately 5 LB.
Compatibility: Fits all standard 2” hole Olympic plates.
Origin: Made in the USA.
Color: Black with yellow Spud Inc. branding.
Performance Benefits
Maximum Portability: Replaces over 40 LB of steel equipment with 5 LB of high-strength nylon, making it the premier choice for athletes who travel or have limited storage space.
Adjustable Height: The strap length can be adjusted to suit the height of the athlete, ensuring the plates clear the ground and don't interfere with your stride.
Grip & Core Overload: Because the weights are suspended by straps, they create a "swinging" or "live" weight effect that is more challenging to stabilize than rigid steel handles, further taxing the core and forearms.
Versatile Utility: Beyond carries, these handles can be used for stationary grip holds, shrugs, and even "weighted pull-up" handles when looped over a bar.
Floor Protection: When used with bumper plates, these handles are much quieter and more forgiving on gym floors than traditional metal Strongman implements.
Maintenance and Care
Setup: Thread the strap through the center of your plate stack. Pass the strap back through the heavy-duty buckle and cinch it as tight as possible. Ensure the plates are balanced and the buckle is fully engaged before lifting.
Cleaning: Hand wash the nylon straps with mild soap and cold water if they become soiled. Do not machine wash or dry, as high heat can compromise the integrity of the nylon fibers.
Rust Prevention: Wipe the rubber handles with a dry cloth after use to remove sweat and chalk.
Inspection: Before every heavy set, inspect the webbing for any frays, nicks, or signs of heat damage. Check the metal buckles for any signs of bending or stress.
Storage: Store in a cool, dry place. Avoid leaving the straps in direct sunlight for extended periods, as UV rays can degrade nylon over time.
Warranty Information
Spud Inc. products are famous for being "overbuilt" and typically carry a warranty against manufacturing defects in the webbing and hardware.
Note: The warranty does not cover normal wear and tear from dragging the straps on abrasive surfaces (like concrete) or damage caused by loading the handles beyond their rated capacity.
Frequently Asked Questions
Q: Will the plates slide off during the walk? A: No. Once the strap is looped through the center and cinched tight through the buckle, the plates are locked into a secure stack.
Q: Can I use these with iron plates? A: Yes, they work perfectly with both iron and bumper plates. However, iron plates have a smaller diameter, so you may need to adjust the strap length to ensure they don't hit your feet.
Q: Are they sold as a pair? A: Yes, the Spud Inc. Traveling Farmer Walk Handles are sold and shipped as a pair.
Q: How do they feel compared to steel handles? A: They provide a very similar grip stimulus, but the "swing" of the plates makes them feel slightly more unstable. This extra instability is often viewed as a benefit for building a stronger core and better balance.