Overview
The SLM-6 Monster Weight Stack Slinger is a specialized, rack-mounted cable system engineered specifically for the Rogue RM-6 Monster Power Rack. It addresses the common challenge of space constraints by allowing the weight stack to sit within the rear 24” section of the rack while the athlete works off the front uprights. This patented design provides the full training benefits of a traditional lat pulldown machine within a significantly smaller and more cost-effective footprint. It is an ideal solution for home and commercial gyms that need high-performance cable functionality without sacrificing power rack versatility.
Product Page: SLM-6 Monster Weight Stack Slinger
Key Features and Specifications
Rack Compatibility: Compatible ONLY with Rogue Monster Series units (1” hardware).
Weight Stack: 300 LB stack in 10 LB increments with chrome-plated guide rods.
Ratio: Operates as a 1:1 ratio system for direct resistance.
Height Options: Available for 90”, 100”, or 108” rack heights.
Components: * 1/4" thick laser-cut and formed steel mounting plates.
MIL Spec 1/4" steel cable (extended length for RM-6 configuration).
6” high-quality pulleys.
Black Zinc mounting hardware.
Dimensions: Extends 7" beyond the face of the mounting upright and 7" above the top of the upright.
Finish: Signature Texture Black Powdercoat with Rogue branding.
Manufacturing: Made in the USA.
Performance Benefits
Optimized for RM-6: Specifically designed to let users position their rack against a wall while maintaining full access to the cable system from the front.
Space & Cost Efficiency: Delivers a commercial-grade lat pulldown and low row experience without the massive footprint or expense of a standalone machine.
Independent Stations: By utilizing an additional rear pulley and bracket, the weight stack is tucked away safely, freeing up the main rack area for squats and presses.
Customizable Grip: Compatible with a wide array of attachments (lat bars, tricep ropes, straps) to target different muscle groups effectively.
Maintenance and Care
Anchoring Requirement: Any rack or rig utilizing the Slinger attachment must be securely fastened to the floor before use to prevent tipping.
Cable Inspection: Periodically check the MIL spec steel cable for signs of wear, fraying, or kinking. Replace immediately if any damage is visible.
Guide Rod Lubrication: Keep the chrome-plated guide rods clean. Wipe them down monthly and apply a thin layer of silicone lubricant to ensure the weight stack glides smoothly and silently.
Pulley Check: Ensure pulleys are free of dust and debris. Check that they spin freely without resistance to avoid premature cable wear.
Hardware Verification: Periodically check all 1” black zinc bolts to ensure they remain tightened to the manufacturer's specifications.
Frequently Asked Questions
Q: Can I use this on a Monster Lite rack?
A: No, this model uses 1” hardware for the Monster series. A separate model (SLML-6) is available for Monster Lite racks with 5/8” hardware.
Q: Is a lat bar included?
A: No, handle attachments are optional. You can add a stainless steel lat bar or various tricep straps during checkout.
Q: Can I perform low rows with this?
A: Yes, when paired with the optional Monster Rack Mount Lat Pulldown Seat + Low Row Kit, the Slinger can be converted into a complete high/low cable station.
Q: My rack was purchased before 2016; will this fit?
A: Older Monster racks may lack the necessary cable pass-through holes in the crossmembers. Please contact Rogue customer support to verify or for drilling instructions.