Overview
The Rogue RML-3W Fold Back Wall Mount Rack is the industry standard for space-saving garage gym equipment. Built on the Monster Lite platform (3x3" 11-gauge steel), it offers the structural integrity of a full power rack with the ability to fold flat against the wall when not in use. Utilizing a unique hinge-and-pin system, the RML-3W can be retracted to a depth of less than 5 inches, allowing you to reclaim your floor space for parking cars or other activities.
Product Page: Rogue RML-3W Fold Back Wall Mount Rack
Key Features and Specifications
Series: Monster Lite (3x3" 11-gauge US steel).
Hardware: 5/8” diameter SAE grade 5 bolt hardware.
Hole Spacing: Westside pattern (1” spacing through the bench/pull zone, 2” spacing above and below).
Retractable Design: The uprights can fold inward (toward each other) or outward depending on your depth choice and wall space.
Depth Options:
21.5” Depth: The most popular option; folds completely flush against the wall.
41.5” Depth: Provides more interior space for gymnastic movements or kipping pull-ups.
Dimensions:
Height: 90.375".
Width: 49" (Outside-to-outside of uprights).
Standard Inclusions: (1) Set of Monster Lite J-Cups, (4) Mounting Brackets, (4) Detent Pins, (1) Quick-attach Pull-Up Bar, and (2) UHMW Plastic Floor Caps.
Manufacturing: Proudly Made in the USA (Columbus, Ohio).
Performance Benefits
Maximum Space Efficiency: Perfect for shared spaces. When stowed, it takes up less room than a standard bookshelf.
Rock Solid Stability: Unlike many "flimsy" wall-mount racks, the RML-3W feels like a permanent power rack once locked into the open position with the provided detent pins.
Fast Setup: The quick-attach pull-up bar utilizes hitchpins and a lanyard, allowing it to be installed or removed in seconds.
Modular Customization: Compatible with the vast majority of Rogue Monster Lite accessories, including the Matador, Landmine, and various storage pins.
Maintenance and Care
Stringer Installation: Rogue highly recommends the use of Rogue Monster Lite Stringers for mounting to wood studs. Mounting directly to drywall or metal studs without structural support is not recommended.
Hinge Check: Periodically check the detent pins and hinge brackets to ensure they are free of debris and that the pins seat fully into the locked position.
Lubrication: A drop of dry silicone lubricant on the hinge points every year will keep the swing arms moving smoothly.
Cleaning: Wipe down the Matte Black powder coat with a mild detergent and water.
Floor Protection: Ensure the UHMW plastic caps remain on the bottom of the uprights to prevent scratching your floor or concrete.
Warranty Information
Frame and Welds: Guaranteed by Rogue for Life.
Frequently Asked Questions
Q: Can I use Safety Spotter Arms on this rack?
A: Yes, but with caution. Spotter arms apply significant leverage to the wall. Rogue recommends having a contractor verify your wall's structural integrity before using spotter arms for heavy loads.
Q: Will it fit under an 8-foot ceiling?
A: Yes. At 90.375" tall, it leaves approximately 5.5 inches of clearance in a standard 96" room.
Q: Do I have to bolt the bottom brackets into my floor?
A: No. The uprights rest on the floor, but the brackets mount only to the wall. The weight is transferred down through the uprights to the ground.
Q: Can I mount this to a brick or concrete wall?
A: Yes, but you will need to source your own appropriate masonry anchors, as the standard stringer kit includes lag bolts meant for wood studs.