Overview
The Rogue R-3W Fold Back Wall Mount Rack is the original space-saving solution that pioneered the retractable rack movement. Part of the Infinity Series, it features 2x3" 11-gauge steel uprights and utilizes a unique hinge-and-pin system that allows the rack to fold inward or outward against a wall. This design is perfect for multi-purpose garage gyms, allowing you to have a world-class power rack for training and a clear floor for parking your car in just a few seconds.
Product Page: Rogue R-3W Fold Back Wall Mount Rack
Key Features and Specifications
Series: Infinity Series (2x3" 11-gauge US steel).
Hardware: 5/8” diameter SAE grade 5 bolt hardware.
Retractable Design: Uprights fold flat against the wall, occupying less than 5" of depth when stowed.
Hole Spacing: Westside pattern (1” through the bench/pull zone, 2” spacing above and below).
Depth Options:
20.5” Depth: Folds flush against the wall.
40.5” Depth: Provides more interior space for kipping pull-ups and gymnastic work.
Dimensions:
Height: 90.375".
Width: 47" (Outside Uprights).
Standard Inclusions: (1) Set of Infinity J-Cups, (4) Mounting Brackets, (4) Detent Pins, (1) Quick-attach Pull-Up Bar, and (2) UHMW Plastic Floor Caps.
Manufacturing: Proudly Made in the USA.
Performance Benefits
Pioneering Space Efficiency: The original retractable rack that maximizes floor space without sacrificing the stability of a standard power rack.
Infinity Series Versatility: While the Monster Lite series is popular, the 2x3" Infinity series remains a favorite for its extensive history and compatibility with a wide range of accessories.
Speed of Transition: The detent pin and hinge system allow for a seamless transition from "gym mode" to "garage mode."
Precise Adjustment: Features the classic Westside hole spacing, enabling athletes to dial in the perfect height for bench press and squatting.
Durable Construction: Built with the same high-quality steel and attention to detail as Rogue’s freestanding racks, ensuring it handles heavy squats (500LB+) without issue.
Maintenance and Care
Stringer Requirement: Rogue highly recommends installing this rack with a pair of Infinity Stringers to ensure it is securely mounted to wood studs.
Wall Structural Check: Periodically inspect the mounting lag screws and wall integrity, especially if using safety spotter arms, which apply significant torque to the wall.
Hinge Maintenance: Apply a light coat of dry silicone lubricant to the hinge points once a year to ensure the swing arms move freely.
Cleaning: Wipe down the Signature Black powder coat with a mild detergent and water.
UHMW Inspection: Check the plastic liners on your J-cups and the floor caps on the base of the uprights for wear.
Warranty Information
Frame and Welds: Guaranteed by Rogue for Life.
Frequently Asked Questions
Q: What is the difference between the R-3W and the RML-3W?
A: The R-3W is from the Infinity Series (2x3" steel). The RML-3W is from the Monster Lite Series (3x3" steel). The RML-3W is slightly heavier and uses thicker uprights.
Q: Does it fit in a room with an 8-foot ceiling?
A: Yes. At 90.375" tall, it leaves approximately 5.5 inches of clearance in a standard 96" room.
Q: Can I use Safety Spotter Arms?
A: Yes, but ensure your wall is structural. Rogue recommends having a contractor verify your setup if you plan to use spotter arms for heavy lifting.
Q: Do I have to bolt it to the floor?
A: No. The uprights sit on the floor, but the rack is secured only to the wall via the brackets.