Overview
The Rogue R-6 Power Rack is the heavy-duty storage hub of the Infinity Series, essentially combining the expanded lifting area of the R-4 with a massive integrated plate storage system. Built from ultra-durable 2x3” 11-gauge steel with 5/8” hardware, the R-6 is designed for athletes who want a single, centralized station for heavy lifting and total organization. By adding two additional uprights and six storage posts to the R-4 platform, the R-6 creates a professional-grade "beast" suitable for garage gyms and elite training facilities alike.
Product Page: Rogue R-6 Power Rack
Key Features and Specifications
Series: Infinity Series (2x3” 11-gauge US steel).
Hardware: 5/8” diameter SAE grade 5 bolts and fasteners.
Hole Spacing: Westside pattern (1” through the bench and clean pull zone, 2” spacing above and below).
Dimensions:
Height: 90.375".
Interior Depth: 43" (Lifting zone).
Width: 47" (Outside Uprights) / 53" (Overall Footprint).
Total Footprint: 80" Deep x 53" Wide.
Standard Inclusions: (2) Infinity J-Cups with protective plastic, (2) Pin/Pipe Safeties, (4) Single Plate Storage Posts, (2) Double Plate Storage Posts, (6) Band Pegs, (1) 43” Fat/Skinny Pull-Up Bar, and (1) X-43 Multi-Grip Bar.
Finish: Signature Black powder coat.
Manufacturing: Proudly Made in the USA.
Performance Benefits
Maximum Organization: Features six storage posts (4 single, 2 double), allowing you to keep all your Olympic plates off the floor and within arm's reach for fast loading.
Enhanced Stability: The large 80" footprint and the significant ballast provided by stored plates make the R-6 exceptionally stable. While floor anchoring is recommended, it is often preferred by those who want the most "anchored" feel possible.
Dual Pull-Up Options: Comes standard with both the Fat/Skinny Pull-Up Bar and the X-43 Multi-Grip Bar, offering a wide range of grip options for pull-ups and hanging abdominal work.
Westside Precision: Features 1" hole spacing through the "bench zone," allowing for perfect safety and J-cup adjustments for solo lifters.
Infinity Versatility: Fully compatible with all Rogue Infinity Series accessories, including the Matador, Landmine, and Slinger systems.
Maintenance and Care
Bolting Requirement: Rogue highly recommends securing the R-6 to the floor using a concrete anchor kit. While the weight of the plates adds stability, bolting is necessary to ensure zero movement during dynamic kipping or heavy racking.
Hardware Audit: Periodically check all 5/8” bolts and nuts. Perform a structural audit after the first month of use and every six months thereafter.
UHMW Protection: Inspect the UHMW plastic liners on your J-cups regularly. Replace these if they wear thin to protect your barbell's knurling and the rack's finish.
Surface Cleaning: Wipe down the powder-coated frame with a mild soap and water solution.
Rust Prevention: In non-climate-controlled spaces, keep the rack dry and touch up any scratches with matte black paint to prevent surface oxidation.
Warranty Information
Frame and Welds: Guaranteed by Rogue for Life.
General Parts: Standard Rogue limited warranties apply to mechanical accessories.
Frequently Asked Questions
Q: Does it fit in a room with an 8-foot ceiling?
A: Yes. At 90.375" tall, it fits in a standard 96" (8ft) room, though the Multi-Grip Bar may require an extra inch or two for comfortable pull-up clearance.
Q: Can I use Monster Lite accessories on this rack?
A: While both use 5/8" hardware, Monster Lite accessories are designed for 3x3" steel. Many will not fit the 2x3" profile of the R-6 without modification.
Q: Are tools included?
A: No, you will need 15/16" sockets or wrenches for the 5/8" hardware.
Q: Is the pull-up bar height adjustable?
A: Yes, the crossmembers can be mounted at various heights along the uprights to suit your preference.