Overview
The Rogue SP3358 Plate Storage Pair is a space-efficient and cost-effective storage solution designed specifically for the Monster Lite series. These "Long" storage pins bolt directly to the uprights of an existing rig or rack, allowing users to maximize their training space by eliminating the need for standalone plate trees. By utilizing the vertical steel of your rack, you can add significant storage capacity for Olympic bumper plates or cast iron plates while keeping them within arm's reach during workouts.
Product Page: SP3358 Plate Storage Pair - Long for Monster Lite
Key Features and Specifications
Made in the USA: Manufactured with Rogue’s signature industrial quality.
Loadable Capacity: Each 13-3/8" pin provides a 12.5" loadable post length.
Weight Capacity: Each individual post can hold 180LB+ (actual capacity varies by the width of the plates used).
Hardware: Includes necessary 5/8” hardware for installation.
Dimensions: 13-3/8" (L) x 2" (W) x 8" (H).
Weight: 15LB per pair.
Compatibility: Designed exclusively for Rogue Monster Lite uprights (3x3" tubing with 5/8" holes).
Note: Not compatible with SML-1, S-1, or S-4 Squat Stands.
Performance Benefits
Space Optimization: Ideal for garage gyms or tight training facilities where floor space is at a premium.
Convenience: Keeps plates organized and easily accessible on the rack, speeding up transitions between sets.
Heavy-Duty Storage: The "Long" version is specifically intended for bumper plates, which are thicker than standard iron plates, providing enough depth to store multiple 45LB bumpers on a single pin.
Stabilization: Storing heavy plates on the base of a rack can add extra stability to the unit during pull-ups or dynamic movements (though bolting the rack to the floor is still recommended).
Maintenance and Care
Hardware Inspection: Regularly check the 5/8” bolts to ensure they remain tight. Vibrations from rack use can occasionally loosen hardware over time.
Finish Protection: Metal-to-metal contact from sliding plates on and off the posts may cause wear on the powder coat finish over time. This is normal for heavy-use storage equipment.
Cleaning: Wipe down the posts with a damp microfiber cloth to remove dust or moisture. Avoid abrasive chemical cleaners that could damage the texture black finish.
Safety Check: Ensure the rack is balanced. Avoid loading all heavy plates on one side of a light rack if it is not bolted to the floor.
Frequently Asked Questions
Q: Does this come as a single pin or a pair? A: The SP3358 is sold as a pair, meaning you receive two storage pins and the required hardware with each order.
Q: Will these fit a standard 2x3" or a Monster 3x3" rack? A: No. These are designed specifically for the Monster Lite series (3x3" with 5/8" holes). They will not fit the Monster Series (1" holes) or the Infinity/Echo Series (2x3" tubing).
Q: Do I need special tools for installation? A: You will need a 15/16” socket or wrench to tighten the 5/8” hex head hardware provided.