Overview
The Rogue SP33100 Plate Storage Pair is the heavy-duty, bolt-on storage solution for the Rogue Monster Series. These "Long" pins are the ultimate choice for permanent plate organization on a 3x3" rack. With a 12.25" loadable length and massive 1" hardware, they are engineered to support the heaviest bumper plate collections while significantly increasing the footprint and stability of your rack.
Product Page: SP33100 Plate Storage Pair - Long for 1" Monster
Key Features and Specifications
Made in the USA: Manufactured in Columbus, Ohio.
Compatibility: Designed exclusively for Rogue Monster Series (3x3" tubing) with 1" holes.
Note: Not compatible with Monster Lite (5/8" holes) or Infinity Series.
Loadable Length: 12.25” of usable storage space per pin.
Construction: 1.5” Schedule 40 pipe welded to a 1/4" thick steel mounting plate.
Hardware: Includes (2) massive 1” x 4.5” hex head bolts and nuts per pair.
Finish: Signature Texture Black powder coat.
Weight Capacity: Rated for 180LB+ per post (360LB+ per pair).
Performance Benefits
Bumper Plate Optimized: The 12.25" length is deep enough to hold three to four full-sized 45LB/20KG Echo or Competition bumpers, keeping your primary weights off the floor.
Maximum Security: Unlike "quick-change" pins that can have minor play, these bolt-on pins are locked in with 1" hardware, ensuring zero sag or movement even when maxed out with iron plates.
Rack Anchor: Adding several pairs of these to the rear uprights of a Monster Rack adds hundreds of pounds of "dead weight," effectively anchoring the rack to the floor for heavy pull-ups, dips, or band work.
Aesthetic Integration: The Texture Black finish and oversized 1" bolts perfectly match the "overbuilt" look and feel of the Monster ecosystem.
Maintenance and Care
Mounting Requirements: Requires 1-1/2” wrenches or sockets to tighten the 1" hardware. Ensure the mounting plate is flush against the upright before torquing the bolts.
Hardware Inspection: Periodically check the 1" nuts. While they rarely loosen due to their size, the vibrations from a 600LB squat being re-racked can cause stationary hardware to settle over time.
Cleaning: Wipe the powder-coated post with a damp microfiber cloth to remove chalk and dust.
Finish Care: Constant sliding of metal-centered plates will cause surface scratches on the powder coat. This is purely cosmetic and expected with high-use plate storage.
Upright Protection: To prevent scratching your rack's powder coat during installation, ensure the mounting plate is free of metal burrs or debris before bolting it down.
Frequently Asked Questions
Q: Will these fit my Monster Lite rack? A: No. Monster Lite racks use 5/8" hardware. For those, you need the SP3358 Plate Storage Pair.
Q: Can I mount these to the side of my rack? A: Yes, these can be mounted to the front, back, or sides of any Monster upright, provided the placement doesn't interfere with your barbell path or safety arms.
Q: Do I need the "Keyhole" version instead? A: The SP33100 is a standard bolt-on pin. If you want the version with the Acetal protective sheath and the specialized "Keyhole" nub for even faster/cleaner mounting, look for the Monster Keyhole Plate Storage Pin.