Overview
The Rogue Infinity Short Plate Storage Posts are a compact, bolt-on storage solution designed specifically for the Rogue Infinity Series. These 5” long pins are the perfect addition to any 2x3” upright, providing a dedicated home for change plates and smaller weight increments. By separating your 1.25LB to 10LB plates from your heavy bumpers, you streamline your loading process and keep your gym floor clear of small trip hazards.
Product Page: Infinity Short Plate Storage Posts
Key Features and Specifications
Made in the USA: Manufactured in Columbus, Ohio.
Compatibility: Designed exclusively for Rogue Infinity Series (2x3” uprights) and Echo Series racks with 5/8” holes.
Note: Not compatible with Monster Lite (3x3") or Monster (3x3" with 1" holes) uprights.
Loadable Length: 5” of usable storage space per pin.
Construction: 1.5” Schedule 40 pipe welded to a 1/4" thick steel mounting plate.
Hardware: Includes (2) 5/8” x 3” hex head bolts and nuts per pair.
Weight: 7LB per pair.
Finish: Signature Texture Black powder coat.
Performance Benefits
Specialized Change Plate Storage: The 5" length is optimized for a full set of iron change plates. Because the post is shorter than a standard bumper pin, it doesn't protrude unnecessarily into your lifting area.
"Eye-Level" Convenience: Most athletes mount these higher on the rack uprights. This keeps small weights at chest or eye level, making micro-loading during bench presses or overhead presses much faster.
Rack Reinforcement: Adding weight to the uprights increases the overall mass of the rack, which can help dampen vibrations and reduce "walking" on non-bolted squat stands.
Clean Organization: Prevents small plates from getting lost at the back of long bumper pins or cluttered on the floor.
Maintenance and Care
Mounting Hardware: Requires a 15/16” wrench or socket for installation. Ensure the mounting bracket is flush against the 3" side of the Infinity upright before tightening.
Hardware Inspection: Regularly check the 5/8" bolts. Vibrations from heavy barbell drops can cause storage hardware to loosen over time.
Finish Care: Constant sliding of iron plates will eventually wear the powder coat finish. To maintain the look, wipe with a damp microfiber cloth to remove dust and chalk.
Safety Placement: Ensure the posts are mounted in a location that does not interfere with the movement of your J-cups or your own body during a lift.
Frequently Asked Questions
Q: Will these fit my 3x3" Monster Lite rack? A: No. While the hole size (5/8") is identical, the mounting bracket is sized for a 2x3" Infinity upright. For 3x3" racks, look for the Monster Lite Short Plate Storage Posts.
Q: How many 10LB plates can I fit on one pin? A: Depending on the thickness of the plates (Cast Iron vs. Urethane), you can typically fit 4 to 6 ten-pound plates on a 5" loadable post.
Q: Can I mount these to the base of my squat stand? A: Yes, as long as the base has 5/8" holes and 2x3" tubing, these can be mounted horizontally on the base to act as vertical storage pins.