Overview
The Rogue SP2250 Plate Storage Pair is a heavy-duty, bolt-on storage solution designed specifically for the Rogue Echo Series and the Rogue Mass Storage System. These 13-3/8" long pins are engineered to transform your 2x2" uprights into a high-capacity weight tree. By utilizing the vertical space of your rack or storage unit, you clear floor space and keep your bumper plates organized and within easy reach.
Product Page: SP2250 Plate Storage Pair - Long for 2x2" Echo
Key Features and Specifications
Made in the USA: Manufactured in Columbus, Ohio.
Compatibility: Designed exclusively for 2x2” tubing with 1/2” holes.
Compatible: Rogue Echo Series racks/squat stands and the standard Rogue Mass Storage System.
Not Compatible: Monster Lite (3x3") or Monster (3x3") Series.
Loadable Length: 12.25” of usable storage space per pin.
Construction: 1.5” Schedule 40 pipe welded to a 1/4" thick steel mounting plate.
Hardware: Includes (2) 1/2” x 3” hex head bolts and nuts per pair.
Weight Capacity: Rated for 180LB+ per post.
Finish: Signature Texture Black powder coat.
Performance Benefits
Bumper Plate Optimized: The 12.25" length is specifically designed to hold multiple thick bumper plates (like Rogue Echo or Hi-Temp bumpers) that often won't fit on shorter, standard change plate pins.
Rack Stabilization: Mounting these at the base of an Echo squat stand and loading them with plates acts as a natural anchor, reducing the tendency for the rack to "walk" or sway during intense workouts.
Mass Storage Expansion: When used with the Rogue Mass Storage System, these pins allow you to store change plates or smaller bumpers on the outside of the uprights, freeing up the main shelves for dumbbells and kettlebells.
Seamless Integration: The bracket is sized perfectly for the 2" face of the Echo upright, ensuring a flush, professional-looking fit that won't interfere with other attachments.
Maintenance and Care
Mounting Requirements: Requires a 3/4” wrench or socket for installation. Ensure the bracket is flush against the upright before fully torquing the bolts.
Hardware Inspection: Check the 1/2" bolts monthly. The vibration from racking heavy weights on the pins can cause the hardware to settle or loosen over time.
Cleaning: Wipe the powder-coated post with a damp microfiber cloth to remove chalk and dust.
Finish Care: Constant sliding of weight plates will eventually wear the powder coat on the post. This is a normal cosmetic occurrence for weight storage equipment and does not compromise the structural steel.
Upright Protection: Ensure the mounting surface of the bracket is free of metal burrs before installation to prevent scratching your rack's finish.
Frequently Asked Questions
Q: Will these fit my Infinity (2x3") rack? A: No. While Infinity racks use 5/8" hardware, the SP2250 is designed for 1/2" hardware and 2" wide tubing. For Infinity, you should use the SP2358 model.
Q: Can I mount these to a wall? A: No. These are intended to bolt through 2x2" steel tubing. For direct wall mounting, consider the Rogue 24" Wall Storage Stringer.
Q: How many 45LB plates can I fit? A: You can typically fit (3) standard 45LB bumpers or up to (5-6) cast iron 45LB plates per 12.25" post.