Overview
The Rogue 24" Wall Storage Stringer is a versatile, space-saving organization tool designed to mount plate storage posts directly to your wall. Manufactured in the USA from 11-gauge steel, this stringer is compatible with Rogue’s 5/8” Infinity and Monster Lite bolt-on plate posts. It provides a heavy-duty alternative to floor-based plate trees, allowing you to get your bumper plates off the ground while keeping them easily accessible for transitions between lifts.
Product Page: Rogue 24" Wall Storage Stringer
Key Features and Specifications
Made in the USA: Built with American steel and high-quality craftsmanship.
Compatibility: Designed for use with Rogue 5/8” Infinity and Monster Lite Plate Storage Posts.
Construction: 11-gauge steel with laser-cut Rogue branding.
Dimensions: 24” L x 13” H; extends only 1.5” off the mounting surface.
Finish: Signature Texture Black powder coat.
Angle of Security: Features a built-in 5-degree upward tilt to ensure stored weight plates remain securely on the posts during use.
Weight: 10.5 lbs (stringer only).
Included Hardware: (4) 3/8” x 2-1/2” black wood lag screws and washers for mounting to standard wood studs.
Ordering Options
There are three primary ways to purchase the 24” Storage Stringer:
Stringer Only: Includes the stringer and all wall-mounting hardware.
With 2 Long Posts: Includes the stringer and (2) 12.25” loadable length plate posts.
With 3 Short Posts: Includes the stringer and (3) 5” loadable length plate posts (ideal for change plates).
Installation and Maintenance
Stud Alignment: CRITICAL: The stringer must be mounted to a minimum of two (2) wood studs. The mounting slots are spaced 11.375” apart vertically and allow for 6” of lateral adjustment to accommodate standard 16” on-center stud spacing.
Mounting Hardware: While wood lags are included, if you are mounting to masonry or steel, you are responsible for sourcing the appropriate heavy-duty hardware for that surface.
Hardware Inspection: Regularly check the lag screws and the 5/8” post bolts to ensure they remain tight, especially when storing heavy 45lb plates.
Cleaning: Wipe the powder-coated steel with a damp microfiber cloth to remove chalk and dust. Avoid abrasive chemical cleaners.
Safety Protocol: Do not exceed the structural capacity of your wall or the stringer. Ensure the unit is level during installation to maintain the 5-degree safety tilt.
Frequently Asked Questions
Q: Will this fit my 1" Monster storage pins? A: No. This stringer is specifically designed with an array of holes for 5/8” mounting hardware (Monster Lite/Infinity series).
Q: Can I hang this horizontally or vertically? A: The stringer is designed for horizontal mounting across two studs to provide the necessary support for the weight of Olympic plates.
Q: Is it easy to move the posts once they are installed? A: Yes. The stringer features four rows of holes spaced 2” on center, allowing you to reposition your storage posts vertically or horizontally by simply unbolting the 5/8" hardware.