Overview
The Rogue Monster Lite Short Plate Storage Post Pair is a compact, space-saving solution designed to keep your change plates and smaller increments organized and accessible. These "Short" pins bolt directly to any Monster Lite Series upright, allowing you to utilize the vertical space of your rack instead of relying on floor-based trees. While the "Long" version is intended for heavy bumper plates, the Short version is the ideal choice for 1.25LB to 10LB change plates, keeping them separated from the larger wheels for faster loading.
Product Page: Monster Lite Short Plate Storage Post Pair
Key Features and Specifications
Made in the USA: Manufactured with Rogue’s signature industrial quality in Columbus, Ohio.
Compatibility: Designed exclusively for Rogue 3x3” Monster Lite uprights with 5/8” holes.
Note: Also compatible with Infinity Series (2x3") racks using 5/8" hardware.
Loadable Capacity: Each pin provides a 5" loadable post length.
Construction: 1.5” Schedule 40 pipe welded to a 0.25" thick steel base plate.
Hardware: Includes (2) 5/8” x 4” hex head bolts and nuts for secure installation.
Weight: 7.5LB per pair.
Finish: Signature Texture Black powder coat for a non-slip feel.
Performance Benefits
High Efficiency: The 5" length is perfect for storing a full set of iron change plates (e.g., a pair each of 10, 5, 2.5, and 1.25LB) without the post sticking out too far into your lifting area.
Customizable Placement: Because these use 5/8" hardware, they can be mounted at any height on your rack's uprights. Many users mount them higher up for "eye-level" access to small plates during benching.
Space Saving: Eliminates the "clutter" of small plates resting on the floor or taking up valuable space on longer bumper plate storage pins.
Rigidity: Unlike "pin-only" designs, the welded base plate ensures the post stays perfectly perpendicular to the upright, even when fully loaded with cast iron.
Maintenance and Care
Hardware Inspection: Regularly check the 5/8” bolts to ensure they remain tight. The vibrations from re-racking a barbell can occasionally cause storage hardware to loosen over time.
Finish Protection: Metal-to-metal contact is inevitable with weight storage. While the texture black powder coat is durable, sliding iron plates will cause surface wear. Wipe with a damp cloth to remove dust.
Safety Step: Ensure that the placement of the short posts does not interfere with the travel of your J-cups, Safety Spotter Arms, or your own range of motion during specific lifts.
Frequently Asked Questions
Q: Will these fit the Rogue Monster Series? A: No. The Monster Series uses 1” hardware. These are specific to the 5/8” hardware used on Monster Lite and Infinity lines. For Monster Series, look for the Monster Plate Storage Pin.
Q: Can I store 45LB bumper plates on these? A: You can, but it is not recommended. Most 45LB bumper plates are roughly 3" to 3.75" wide, meaning you would only be able to fit one plate per post. For bumpers, the Long (12.5") version is much more practical.
Q: Do I need a specific wrench for installation? A: You will need a 15/16” wrench or socket to tighten the 5/8” hex hardware provided.