Overview
The Rogue SP2358 Plate Storage Pair (Long) is a heavy-duty, bolt-on storage solution designed specifically for the Rogue Infinity Series. These 13-3/8" long pins allow you to transform the uprights of your power rack or squat stand into a high-capacity weight tree. By moving your bumper plates off the floor and onto your rack, you save valuable floor space while increasing the overall stability of your training station.
Product Page: SP2358 Plate Storage Pair - Long for Infinity
Key Features and Specifications
Made in the USA: Manufactured in Columbus, Ohio, using US steel.
Compatibility: Designed exclusively for Rogue Infinity Series (2x3” tubing) and Echo Series racks with 5/8” holes.
Note: Not compatible with Monster Lite (3x3") or Monster (3x3" with 1" holes) uprights due to the bracket size.
Loadable Length: 12.5” of usable post space per pin.
Construction: 1.5” Schedule 40 pipe welded to a 1/4" thick steel mounting plate.
Hardware: Includes (2) 5/8” x 3” hex head bolts and nuts per pair.
Weight Capacity: Rated for 180LB+ per post.
Finish: Signature Texture Black powder coat.
Performance Benefits
Bumper Plate Optimized: The 12.5" loadable length is specifically engineered to accommodate multiple 45LB/20KG bumper plates, which are significantly wider than traditional cast iron plates.
Rack Stabilization: Adding several hundred pounds of plates to the base of an Infinity or Echo rack acts as a natural anchor, reducing "walk" or sway during intense pull-ups or dips.
Ergonomic Accessibility: Unlike low-to-the-ground horizontal racks, these can be mounted at your preferred height on the upright, reducing the need to bend over repeatedly when loading a barbell.
Clean Gym Layout: Consolidates your equipment into a single footprint, making it ideal for tight garage gym setups where every square inch of floor space matters.
Installation and Maintenance
Mounting Requirements: Requires a 15/16” wrench or socket for installation. The bracket is designed to sit flush against the 3" face of a 2x3" Infinity upright.
Hardware Inspection: Check the 5/8" bolts monthly. Frequent "racking" of heavy weights on the storage pins can cause minor vibrations that may loosen the nuts over time.
Finish Care: To maintain the powder coat, wipe down the posts with a damp cloth to remove chalk and dust. Metal-to-metal contact from plates will eventually cause surface scratches; this is purely cosmetic and does not affect structural integrity.
Safe Loading: For unbolted squat stands, always load the storage pins from the bottom up to ensure the unit remains bottom-heavy and stable.
Frequently Asked Questions
Q: Will these fit a Monster Lite (3x3") rack? A: No. While the hole size (5/8") is the same, the mounting bracket for the SP2358 is specifically sized for the 3" width of an Infinity upright. For 3x3" racks, you should purchase the SP3358 version.
Q: How many 45LB Echo Bumpers fit on one pin? A: A single 12.5" pin can typically hold (3) 45LB Echo Bumper plates with room for a smaller change plate, or (2) 45LB plates with significant extra room.
Q: Can I mount these to a wall? A: These are designed to bolt through a steel upright. They are not intended for direct-to-wall mounting. For wall storage, look at the Rogue 24" Wall Storage Stringer.