Overview
The AbMat Atlas Stone Return Ramp is a specialized training accessory designed to streamline Strongman workouts and protect both the athlete and the training environment. Developed in collaboration with AbMat, this ramp provides a controlled, decelerated path for Atlas Stones to return to the starting position after being loaded over a bar or platform. By eliminating the need for a second person to catch or reset the stone, it increases training efficiency and safety.
Product Page: AbMat Atlas Stone Return Ramp
Key Features and Specifications
Construction: High-density, impact-absorbing foam core with a heavy-duty vinyl cover.
Design: Features a contoured "U-shaped" channel to keep the stone centered and prevent it from rolling off the sides during the return.
Dimensions: 48” Length x 20” Width x 10” Height (at the peak).
Portability: Lightweight design compared to wooden or metal ramps, making it easy to move and store.
Compatibility: Designed for use with concrete Atlas Stones, Rogue Rubber Atlas Stones, and Strongman Sandbags.
Base: Non-skid bottom material to ensure the ramp stays in place during high-impact use.
Origin: Made in the USA.
Performance Benefits
Enhanced Safety: Prevents heavy stones from dropping directly onto the floor or bouncing unpredictably, protecting the athlete’s feet and the facility's subflooring.
Solo Training: Enables a single athlete to perform high-volume stone loading sessions without needing a "spotter" to reset the stone.
Equipment Longevity: Softens the landing for concrete stones, reducing the frequency of chipping and cracking, and preserves the life of rubber gym mats.
Noise Reduction: The high-density foam significantly dampens the sound of falling stones, making it ideal for garage gyms or noise-sensitive training facilities.
Maintenance and Care
Cleaning: The antimicrobial vinyl cover can be wiped down with a damp cloth and mild soap or a standard gym equipment disinfectant.
Storage: Store in a dry area. While the vinyl is durable, avoid leaving the ramp in standing water or extreme direct sunlight for extended periods to prevent material degradation.
Usage Guidelines: Ensure the ramp is positioned securely against the loading platform or rig. The stone should be guided into the center of the channel for optimal deceleration.
Inspection: Regularly check the seams and zipper for any signs of stress. Ensure the foam core remains firm and has not been permanently compressed by excessive weight over time.
Weight Limit: While designed for heavy stones, avoid dropping weights significantly sharper or heavier than standard Atlas Stones (e.g., sharp-edged metal implements) which could puncture the vinyl.
Warranty Information
The AbMat Atlas Stone Return Ramp typically carries a 1-Year Warranty against manufacturing defects in the foam and vinyl construction.
Note: The warranty does not cover normal wear and tear from stone impact or damage caused by using the ramp as a landing surface for non-spherical or sharp-edged objects.
Frequently Asked Questions
Q: Can I use this with a 400 LB stone? A: Yes, the high-density foam is engineered to withstand the impact of heavy Atlas Stones, though the lifespan of the foam will vary based on the frequency and weight of the drops.
Q: Does the ramp slide around when the stone hits it? A: The ramp features a non-skid base to minimize movement, but for maximal stability, it is best placed on rubber gym matting or wedged against the base of your loading platform.
Q: Is there any assembly required? A: No, the AbMat Atlas Stone Return Ramp ships fully assembled and ready for use.
Q: Will this work with Strongman Sandbags? A: Absolutely. It provides an excellent soft-landing target for sandbags, preventing them from "pancaking" or stressing the seams upon impact with hard flooring.