Overview
The Rogue Monster Single Bar Holder is a heavy-duty, rack-mounted storage accessory designed to provide a secure, vertical storage solution for a single barbell. Specifically engineered for the Monster Series (3x3" uprights with 1" holes), this holder allows you to store your barbell directly on the exterior of your rig, rack, or squat stand. By utilizing vertical space, it keeps your gym organized and protects the bar’s knurling from contact with the floor or other equipment.
Product Page: Monster Single Bar Holder
Compatibility & Mounting Options
This accessory is designed exclusively for the Rogue Monster Series. It includes 1-inch bolts and fasteners for a secure connection.
1. Vertical Mount
Orientation: Recommended for use on full Power Racks and Rigs.
Fit: Attaches vertically to a single 3x3" upright.
2. Horizontal Mount
Orientation: Recommended for use on Squat Stands.
Fit: Attaches horizontally across the rack frame.
Key Features & Specifications
Made in the USA.
Construction: 7" tall steel storage tube with a 2" inside diameter.
Mounting Plate: Holes are spaced 6" on center to align with standard Monster Series hole spacing.
Dimensions: 5.25" L x 3" W x 11" H.
Compatibility: Rogue Monster Series ONLY. (For Infinity or Monster Lite, see the standard version).
Hardware: 1" diameter bolts and mounting hardware included.
Safety Warnings
Exterior Mount Only: The Bar Holder must ALWAYS be mounted on the exterior of the Rack/Rig/Squat Stand.
Pull-Up Bar Clearance: NEVER mount the Bar Holder directly below a pull-up bar. This prevents potential injury should an athlete make contact with the stored bar during training.
Failure to follow these guidelines may result in severe injury.
Performance Benefits
Space Maximization: Frees up floor space by integrating storage directly into your existing strength footprint.
Equipment Longevity: The sleeve-first storage method prevents any contact between the barbell's functional knurling and the storage unit.
Stable Design: Heavy-duty steel construction and 1-inch hardware ensure the bar remains stable and upright, even in high-traffic commercial environments.
Maintenance and Care
Cleaning: Periodically wipe the interior of the tube to remove accumulated chalk or dust that could cause friction against the barbell sleeve.
Cushioning: For added protection of the barbell sleeve end, consider adding an AbMat Barbell Pillow to the bottom of the tube to provide a cushioned landing.
Hardware Inspection: Occasionally check the 1-inch mounting bolts to ensure they remain tight, especially in environments with high vibration or frequent use.
Frequently Asked Questions
Q: Will this fit on my Monster Lite rack (3x3" with 5/8" holes)? A: No. This version uses 1-inch hardware. For Monster Lite racks, please use the Monster Lite/Infinity Single Bar Holder.
Q: Can I store a specialty bar like a Safety Squat Bar in this? A: It is compatible with standard 2-inch diameter Olympic sleeves. Many specialty bars have standard sleeves and can be stored vertically if their weight is balanced.
Q: Does it come with the required bolts? A: Yes. All necessary 1-inch mounting hardware is included with the purchase.