Overview
The Rogue Monster Keyhole Gun Rack™ is a high-density, rack-mounted storage solution designed exclusively for the Rogue Monster Series (3x3” uprights with keyhole patterns). This horizontal hanger system stores up to six barbells directly on your power rack or Monster Mass Storage System. By utilizing the side keyholes of the uprights, the rack provides a stable and secure "drop-and-lock" attachment that clears floor space and maintains equipment accessibility.
Product Page: Monster Keyhole Gun Rack™
Key Features & Specifications
Made in the USA.
Capacity: Stores up to 6 standard barbells horizontally.
Construction: (2) 0.1875" laser-cut and formed steel brackets.
Mounting Design: Machined 1” pegs (spaced 16” on center) featuring a grooved "drop-and-lock" design to fit securely into the side keyholes of Monster uprights.
Bar Protection: Includes 1" thick UHMW plastic inserts in each cradle to protect barbell knurling and finish from metal-on-metal wear.
Dimensions: 4.5" Depth (off front of upright) x 2.5" Width x 31.75" Height.
Weight: 19 LB (total weight for both brackets, unloaded).
Finish: MG Black Powdercoat with laser-cut Rogue branding.
Configuration & Setup
Cradle Spacing: Cradles are spaced 5” on center for easy racking and unracking of bars.
Width Options:
43” Wide Setup: Supports bars by the shaft (standard for most Power Racks).
70” Wide Setup: Supports bars by the sleeves (common for wider rigs or storage systems).
Upright Protection: Each bracket features a stabilizing tab on the back with a pre-installed velcro loop to prevent the steel from scratching the powdercoat of the rack uprights.
Assembly: The unit ships un-assembled; internal hardware to attach the UHMW plastic to the steel brackets is included.
Performance Benefits
Rapid Adjustment: The keyhole peg system allows for tool-less height adjustments and quick re-positioning as your storage needs change.
Superior Bar Protection: The 1-inch thick UHMW plastic provides a deep, cushioned cradle that is significantly more protective than standard adhesive or thin-liner solutions.
Rugged Stability: Once locked into the keyhole pattern, the brackets are rock solid and designed to handle the weight of six specialized or standard barbells without sagging.
Maintenance and Care
Assembly Verification: Ensure all assembly hardware (connecting plastic to steel) is tightened before loading the first bar.
Liner Cleaning: Periodically wipe down the UHMW plastic slots with a damp cloth to remove chalk, sweat, and dust.
Velcro Inspection: Check the velcro protection pads on the stabilizing tabs to ensure they remain in place to protect the upright finish.
Frequently Asked Questions
Q: Will this fit my Monster Lite rack (5/8" holes)? A: No. This attachment requires the specific keyhole pattern found on the side of 3x3” Monster Series uprights. For Monster Lite racks, please see the standard 3-Bar or 6-Bar wall-mount gun racks.
Q: Can I store specialty bars (like a Buffalo Bar) on this? A: Yes, as long as the bar has a straight shaft or sleeve section that can nest within the 1-inch thick plastic hooks.
Q: Is there a smaller version available? A: Yes. Rogue also offers a 3-Bar Monster Keyhole Gun Rack™ for facilities with lower storage requirements.