Overview
The Rogue 10 Bar Holder is a high-capacity, vertical barbell storage floor unit designed to meet the demands of major college athletic facilities, large commercial gyms, and organized garage gyms. Unlike smaller vertical racks, this unit features ten individual storage tubes, each reinforced by heavy-duty 11-gauge steel supports. Its sleeve-first design ensures that barbell knurling remains untouched, preserving the integrity of your equipment over time.
Product Page: Rogue 10 Bar Holder
Key Features & Specifications
Made in the USA.
Capacity: Stores up to 10 standard Olympic barbells vertically.
Construction: (10) 2" diameter steel tubes supported by 2x3” 11-gauge steel.
Base Plates: 3/8” laser-cut steel end plates for extreme stability.
Dimensions: 32 3/8" L x 26" W x 10 1/2" H.
Footprint: 32 3/8" x 26".
Weight: 75 LB (Dry weight ensures the unit will not tip, regardless of weight distribution).
Finish: Signature Rogue Black Powder Coat.
Performance Benefits
High Stability: The 75 LB weight and wide footprint provide a low center of gravity, allowing you to store heavy specialty bars (like Farmer’s Walk handles) safely.
Barbell Longevity: Vertical storage prevents bars from leaning against walls, which can cause bending over time. The sleeve-first method keeps the functional part of the bar (the knurling) off the steel frame.
Versatile Placement: While stable as a standalone floor unit, the foot plates include pre-drilled holes for those who prefer to bolt the unit directly to the floor for maximum security.
Efficient Organization: Clears significant floor space by grouping an entire barbell fleet into a single, organized 3-foot area.
Maintenance and Care
Internal Tube Cleaning: Periodically wipe the inside of the 2" tubes to remove accumulated chalk, dust, and debris that can cause friction against barbell sleeves.
Cushioning: For added protection, consider using AbMat Barbell Pillows, which can be dropped into each tube to provide a cushioned landing surface for the barbell sleeve end.
Floor Anchoring: If used in a high-traffic commercial facility, inspect the anchoring bolts annually to ensure they remain secure.
Installation Instructions
Unpacking: The unit arrives fully assembled. Simply place it in your desired location.
Spacing: Ensure there is sufficient ceiling height to lift the barbells in and out of the 7-inch storage tubes.
Bolting (Optional): If anchoring to the floor, mark the hole locations through the foot plates, drill appropriate pilot holes (for wood or concrete), and secure using 3/8" lag bolts or masonry anchors.
Frequently Asked Questions
Q: Will this hold Farmer's Walk handles? A: Yes. Because the tubes are supported by 2x3" steel and have a 2" inside diameter, they are ideally suited for Farmer's handles and other heavy specialty bars.
Q: Does it fit specialized bars like a Trap Bar? A: Yes, as long as the bar has a standard 2" diameter sleeve. Note that the overall width of the Trap Bar may limit how many bars can be stored in adjacent tubes.
Q: Do I need to bolt it down? A: Bolting is not required for stability due to the 75 LB unit weight, but it is recommended for safety in high-traffic or public commercial environments.