Overview
The Rogue 9 Bar Holder 2.0 is a heavy-duty, vertical barbell storage rack designed to efficiently organize training spaces while protecting your equipment. Re-engineered for maximum durability and bar safety, this compact floor unit allows for the storage of up to nine standard Olympic barbells. Its "sleeve-first" design ensures that the barbell's knurling remains untouched, making it an essential addition for both home gyms and high-traffic commercial facilities.
Product Page: Rogue 9 Bar Holder 2.0
Key Features & Specifications
Made in the USA.
Construction: Nine DOM (Drawn Over Mandrel) steel tubes secured between two laser-cut, 7-gauge steel sheets.
DOM Tubing: 7” long with a 2” inside diameter. DOM steel is used for its smooth internal finish, which is free from burrs and weld spatter, ensuring your barbell sleeves are not scratched during use.
Footprint: 18” x 18” (Occupies minimal floor space).
Weight: 59.3 LB (Provides significant stability even when fully loaded with specialty bars).
Finish: Signature Rogue Black Matte Textured powder coat.
Redesign Upgrades (v2.0): * Shifted from angle iron corners to a laser-cut and bent construction.
Upgraded to DOM tubing for superior sleeve protection.
Features a laser-cut Rogue logo.
Performance Benefits
Space Efficiency: Storing nine bars vertically in a 1.5' x 1.5' area significantly improves the organization and safety of a gym floor.
Extreme Stability: With a dry weight of nearly 60 LB and a low center of gravity, the unit is virtually impossible to tip over under normal use, even when holding heavy specialty bars (e.g., Trap Bars).
Knurling Protection: By storing bars sleeve-first, the functional part of the barbell (the knurling) never makes contact with the steel storage unit.
Sleeve Protection: The smooth interior of the DOM tubing prevents the gouging and scratching commonly found in budget-grade welded pipe holders.
Maintenance and Care
Cleaning: Periodically wipe the interior of the steel tubes with a damp cloth to remove chalk, dust, or debris that could cause friction.
Barbell Pillows: To add an extra layer of protection for your barbell’s sleeve ends, you can purchase AbMat Barbell Pillows, which drop into the bottom of each tube to provide a cushioned landing.
Powder Coat Maintenance: Wipe the exterior with a mild soap and water solution to maintain the matte finish. Avoid abrasive chemicals.
Frequently Asked Questions
Q: Does it need to be bolted to the floor? A: No. The Rogue 9 Bar Holder 2.0 is designed as a standalone floor unit. Its weight and footprint provide ample stability without the need for anchoring.
Q: Will it hold specialty bars like a Trap Bar or Safety Squat Bar? A: Yes, as long as the bar has a standard 2-inch diameter sleeve, it will fit into the DOM tubing.
Q: What is the difference between Version 1.0 and 2.0? A: Version 1.0 used angle iron for corners and standard pipe. Version 2.0 uses superior DOM tubing (smoother interior) and a sleek, laser-cut bent steel frame.