Overview
The Rogue Single Bar Holder is a rack-mounted storage accessory designed to provide a secure, vertical storage solution for a single barbell. It mounts directly to the exterior of any Rogue Monster Lite or Infinity series power rack, rig, or squat stand. By utilizing existing rack holes, this accessory saves floor space while keeping your barbell accessible and protected.
Product Page: Monster Lite/Infinity Single Bar Holder
Compatibility & Mounting Options
Rogue offers two mounting configurations for this accessory. Note: Mounting hardware (5/8” bolts and fasteners) is included.
1. Vertical Mount
Recommended For: Squat Stands (S-Series) and Flat Foot Racks.
Orientation: Attaches vertically to a single upright.
2. Horizontal Mount
Compatibility: NOT compatible with S-Series Squat Stands or Flat Foot Racks.
Orientation: Attaches horizontally across the rack frame.
Key Features & Specifications
Made in the USA.
Construction: 7" tall steel tube with a 2" inside diameter.
Mounting Plate: Holes are spaced 4" on center to align with standard Rogue upright spacing.
Dimensions: 5.25" L x 3" W x 10" H.
Compatibility: Infinity Series (2x3") and Monster Lite Series (3x3").
Hardware: 5/8" diameter bolts.
Safety Warnings
Exterior Mount Only: The Bar Holder must ALWAYS be mounted on the exterior of the Rack/Rig/Squat Stand.
Pull-Up Bar Clearance: NEVER mount the Bar Holder directly below a pull-up bar. This prevents potential injury from an athlete making contact with a stored bar during exercises.
Failure to follow these guidelines may result in severe injury.
Performance Benefits
Space Saving: Eliminates the need for floor-based barbell holders or wall-mounted racks.
Bar Protection: The sleeve-first design ensures that the barbell's knurling never makes contact with the steel storage tube.
Rattle-Free Storage: Precision machining ensures a snug fit for standard 50mm Olympic barbell sleeves.
Maintenance and Care
Cleaning: Periodically wipe the interior of the tube to remove accumulated chalk or dust.
Protection: To add an extra layer of protection for your barbell’s sleeve, consider purchasing AbMat Barbell Pillows, which can be dropped into the bottom of the holder to provide a cushioned landing surface.
Hardware Check: Occasionally verify that the mounting bolts are tight, particularly if the rack is frequently moved or subject to heavy vibration.
Frequently Asked Questions
Q: Will this fit my Rogue Monster (3x3" with 1" holes) rack? A: No. This version is for Monster Lite and Infinity series (5/8" holes). For 1" hole racks, please see the Monster Single Bar Holder.
Q: Can I store specialty bars (like a Trap Bar) in this? A: It is designed for standard Olympic sleeves (up to 2" diameter). If the specialty bar's sleeve is standard size and the bar can balance vertically, it will fit.
Q: Does it damage the finish of the barbell? A: Because the bar is stored sleeve-first, only the sleeve (which is already subject to metal-on-metal contact with plates) touches the holder. The knurling remains untouched.